Precautions and daily maintenance of Techcon TS250 dispensing machine
Release Date：2017-08-03
echconTS250 dispensing machine
Can accurately and consistently apply fluids of high, medium, and low viscosity. The TS250 dispensing machine is an economical, high-precision, and repeatable micro pneumatic dispensing system. This user-friendly fluid dispensing system includes a digital timer with a time adjustment knob for easy setting and vacuum suction for all viscosity ranges. What should be noted when using the TS250 dispensing machine? How to maintain the TS250 dispensing machine on a daily basis? Shenzhen Yapude (Techcon high-quality agent) editor summarizes as follows:
Precautions for using TS250 dispensing machine:
1. Do not exceed the maximum rated power/setting when operating the TS250 dispensing machine.
2. Please make sure to wear appropriate personal protective clothing.
3. Only the following power adapter models can be used: PSA15R-240P (ZJ) or PW118RA2403B01 PW118RA2403H01、PW118RA2403M01、PW118RA2403G01。
4. Please be careful to prevent corrosive or flammable liquids from flowing back into the equipment at the entrance. If corrosive or flammable liquids are used, an intake pipe filter (881-000-000) must be installed on the dispensing machine to prevent the liquid from being sucked back into the equipment.
5. Glue may be toxic and/or hazardous substances. Please carefully read the "Material Safety Data Sheet" and safety precautions.
If the piston is not used in conjunction with the syringe, an intake pipe filter (881-000-000) must be installed on the receiver head to prevent liquid from being sucked back into the equipment. Do not overfill the syringe and place it on its side.
When using flammable liquid materials for dispensing, do not smoke or use open flames.
8. The TS250 glue dispenser can only be used indoors.
Daily maintenance items for TS250 dispensing machine:
1. Ensure that the gas source is clean and dry.
2. Avoid reversing or placing the syringe flat, as this may cause the liquid material to pass through the gas pipeline and enter the internal components.
3. Avoid connecting the TS250 dispensing machine to gases or saturated solutions with excessive humidity.
4. Avoid connecting gas sources with pressure exceeding the 100 psi (6.9 bar) specified in TS250 and the 15 psi (1.0 bar) specified in TS255.
5. Use only pentanol to clean the outer surface of the mainframe.
6. Use only soft fabric to wipe the LCD monitor.
More about TechconTS250 dispensing machineFor more information, please contact Shenzhen Yapude Technology Co., Ltd. at any time. Feel free to consult at 0755-29955243
